Instead of what I'm supposed to be doing

I've got a couple of samples for pattern releases that desperately need to be knit. However, somehow all my yarn and needles and whatnot ended up in the bag with my spinning wheel after the Small Wool Gathering, which got transported to Basingstoke so that we could fit a fourth person plus luggage in the car on the way back to London. So...instead of working on knitting that needs to be done ASAP, I've been enjoying doing other thing.

Things like a little shawl sample for Allison out of Sweet Georgia CashSilk Lace (quite possibly the most gorgeous yarn in the world, just FYI).

I was also very eager to jump into a new sweater project for me - a few weeks back, Knit Edge 4 came out, with the fabulous Ruth Garcia-Alcantud on the cover in her newest gorgeous sweater design, Automne. I'm usually pretty good about not buying yarn on a whim, but I have to knit this sweater. Immediately. My mother had given me some money for my birthday, which I promptly dropped on a sweater's worth of Berroco Ultra Alpaca in a dark green. It arrived with my parents the week before SWG, and when I got back I started to swatch.

Here's where things went wrong: the yarn that Ruth used is very weird in terms of grist (i.e. how many yards there are in a pound). She used Cephalopod Yarns Beastie, which is listed as aran weight, but comes in at a chunky 140 yds/100 g. And the pattern calls for 3.25 sts per inch on US 10.5/6.5 mm needles. Ultra Alpaca is 215 yds/100 g. Somehow I didn't notice the vast discrepancy in grist when I was in the throes of my MUSTBUYYARNNOW!!! fit (bad spinner! No new sweater!). In any case, there was nothing else to do but swatch. So I did.

I was hoping that blocking would cause the alpaca to bloom, but sadly it didn't work out that way. My stitch gauge is spot on but the fabric is really thin and flimsy - not what I want for a sweater-coaty type thing. Bah!

The following days saw much searching of yarn databases and looking for more appropriate substitutes. Sunday saw a trip to John Lewis for my mother to get some yarn for a new sweater for her, and I grabbed a ball of Debbie Bliss Rialto Chunky to swatch with - at 66 yds/50 gr it is much closer to the yarn used in the original.

Much, much, much, much better. Still drapey, but much more substantial. But I'm not buying 24 balls of DB yarn at £6 a pop because, you know, my husband would divorce me. After several more days of searching and banging my head against the computer screen I finally pulled the trigger on a sweater lot of Elann Highland Chunky (76 yds/50 g) in Spiced Wine. Sadly, shipping to the UK was almost as much as the price of the yarn, so it's going to Maine and I will have to wait (sob!) to knit my gorgeous new sweater until after I go back to my parents' house. Which is likely to be next August (woe!).

So. Now I have a sweaters worth of dark green yarn to figure out what to do with . Therefore, I have been swatching...

This is only the first swatch. I've got about 7 more stitch patterns to go. I do not think this is going to be done by November. And I get all my deadline knitting back tomorrow. Guess I'd better keep swatching!

Sticks and carrots

With the start of school, Mother Nature decided that it was time to get back to normal weather patterns - so long glorious English summer of 2013 (truly glorious!), hello stereotypical grey damp autumn. The mornings have had that lovely bite to the air that means true woolen season is just around the corner. This is absolutely my favorite time of year (although I could do with a bit less rain...).

With the newly autumnal temperatures comes the ever predictable bout of startitis - I find myself wanting to cast on ALL THE THINGS! And to be fair, there are quite a number of things I should be casting on - two sample knits for patterns to be released next month first off, not to mention finishing off a shawl that's been on the needles for a couple of months now. But I find myself obsessed with the idea of casting on the perfect fall sweater - roomy, cozy, with long sleeves that come down over my hands and fronts that can wrap around. More specifially, I want the perfect fall sweater knit out of this.

My combo sweater spin from last winter when I was putting the miniSpinner through it's paces. So this week, I succumbed to the overwhelming desire to cast on, and knit...a swatch.

I think I've got the right needle size worked out, and I know the borders and cuffs are going to be in moss stitch.

Now it's just a question of using this project as a carrot to get the other stuff done. But if I play my cards right (and am a good designer do-bee), I can have a new sweater soon. I. Can't. Wait.

A finished present, only 6 months after the fact

My lovely mother-in-law turned 70 last August, and as a present I gave her the choice of any knitted item she might like. After a bit of hemming and hawing, she said she wanted a sweater. Off I went to Ravelry to search for a pattern. After a bit of back and forth, she settled on a lovely pattern from Artesano Yarns. And now, several months later, it's all done.

Pattern: Rachel by Ros Wilson
Yarn: Bartlettyarns Fisherman 2-ply in midnight, just under 5 skeins for the 43" size
Needles: US 10/6.0 mm
Gauge: 15 stitches/20 rows per 4 inches
Start/finish: 4 November 2011 - 23 January 2012
Comments and modifications: Of course I changed things up - it's what I do after all. Can't leave well enough alone...

First off - the arms. The sweater is knit from one cuff to the other, casting on stitches for the body when you get there. The pattern calls for some seriously belled sleeves, but Mermaid wanted normally shaped sleeves, so I did a bit of math and off I went. Not a terribly difficult change, all in all, but I did have to take some careful notes to make sure the arms matched (since they were knit 2 months apart!). The only other change that I made in this version was to work a slightly deeper collar, to match the cuff detail.

However...the pattern, as written, is quite compressed, and I found what I interpreted as a number of errors. Nothing too egregious - mostly around the shoulder shaping and the number of rows that needed to be worked to get both sides to match. And a couple of instances where it seemed like an extra row was thrown in that would mean working things on the wrong side. It's entirely possible that it was operator error, so take that critique with a grain of salt. It's hard to complain with a free pattern after all.

If I made this sweater again (which I'm considering - it's nice and cozy), the only additional mods I would make are as follows: make the body a bit shorter - it's quite long in this version. Might be my gauge at issue, but when I tried it on, it came down way past my hips. I'd prefer it a bit shorter. I'd also change the hem. This has a double thickness hem around the bottom which I'm not a real fan of. I'd add a few of the same ridges that are around the sleeve cuffs and neck to make it a bit more cohesive.

The overwhelming upside of this project was the glorious yarn I used. Bartlettyarns are one of the last mule-spun yarns made. This results in a rustic, nubbly, almost-handspun feel that was a pleasure to work with. And as I was seaming up the finished item, I noticed an interesting thing about the yarn after blocking.

See that? The strand on the left is the unwashed yarn I used for seaming, the one on the right is the end of my blocked swatch. There's a bit of difference, no? I love how much the yarn poofs up after finishing, and I'm really glad I washed my swatch before I checked the gauge and cast on. Imagine the disaster otherwise!

So Mermaid: the sweater is finished. It needs one more bath to even out the seaming, and then it can be on it's way to you. It might go via the Far East though, depending on how organized I get. Hope you can wait! But I'll need some better pictures once it makes it to its new home, ok?

Travel knitting again

While I was packing on Friday, I kept thinking of the knitting things I wanted to work on, and try out, and oh maybe I should bring that just in case. By the end of this internal dialogue and random collecting of yarn and needles and patterns, I had a pile of stuff larger then the pile of clothes I was bringing. Ehem. This is what happens when I pack for a trip and Himself isn't around to quell my hoarding impulses.

So I took a biiiiiiiig step back and realized that I really am looking at three major knitting times - two plane rides and knit night on Thursday with the ladeez (which, to be fair, is likely to involve lots of wine and food, and not so much on the knitting). So I whittled the pile down to:

1) the handspun Sprout Tappan Zee for the elder child-demon*
2) a hank of Cascade 220 Heathers and a bunch of charts from BW's books to try out some swatches for a new design

That was it, until I 3) tossed in a couple of balls of grey DK weight superwash merino to try for the Gherkin mittens that should have been released in pattern form almost a year ago...still, three projects isn't so bad, is it?

* so designated because, after arriving at our home for the week at 8:30 pm local time/2:30 am our time, she decided that 2:30 am local time was time to be awake. I managed to keep them corralled with a combination of threats, sheer force and DVDs on my laptop until almost 6:30, but I'm still considering child-icide.

Monogamy is boring

Project monogamy that is. I've been slogging away on the handspun sweater without a break for the last week plus, and I'm almost to the underarms. It's lovely, but I've had to tink back 300+ stitches several times because I used the wrong color a few rows back, and I'm getting a bit tired of it. Thank goodness it's April 1st and I can start my new socks!

Originally this yarn was slated for Vinnland socks, but when I pulled it out I decided that particular pattern really needed a solid color yarn. So I cast on for Nornir, the Round 2 pattern for Sock Madness 5 - it's working beautifully with the short color runs in this yarn (Woolcraft Superwash Sock Yarn).

I also had a fit of procrastination last week and finished spinning up the Little Barn tweedy fiber I started at the last Spin Night at the beginning of March.

 

It's actually a lot darker in real life - teal and navy and fuschia. The two big skeins are 562 yds of true 3 ply, fingering weight. The teensy skein is the remaining singles chain plied - I didn't both to measure the yardage, but it's probably somewhere in the range of 15-20 yds. Aka not much. This is not the softest yarn in the world, but it will be okay for mittens or something like that, somewhere down the road. Spun/plied at 15:1/12:1, drafting style was short forward draw from the fold.

I've also got a couple more sweater projects on the brain, so there's been much swatching going on.

This is the latest one. The plan is to knit up the prototype in the next month and write up that pattern for testers to finish by early June. I think it will be cute, but we'll see.

So, Month 3 is done - socks were finished, sweater was not, but I'm still plugging away. Hopefully it will be April's sweater.